IN'S Linear Ball Bearing 　 　 Flanged Slide Bearing 　 　 Super Linear Ball Bearing 　 　 TK 　 TW 　 　 IN'S Linear Ball Bearing System Case Unit 　 　 IN'S Linear Ball Bearing System Support Rail Unit 　 　 IN'S Linear Ball Bearing System Shaft Support 　 　 IN'S Linear Ball Bearing System SM Shaft 　 　 IN'S Linear Ball Bearing System Interchangeability list 　 　 IN'S Linear Ball Bearing System Tolerances for inside diameter of housing

Part number Major dimensions Basic load rating Nominal shaft diameter mm 　 closed type 　 　open type mm dr　 D mm mm L mm B W mm D1 mm Open type Dynamic CN static Co(N) 　No.of ball circuits Mass g　 　No.of ball circuits Mass g　 Tolerance* (μm) Tolera nce (mm) Tolera nce (mm) h mm θ Fh11 mm G mm J mm TK10 5 14 — — — 10 +8 19 29 　 22.0 　 1.3 18 — — 　 — — 750 935 10 TK12 5 21 TK12-OP 4 17 12   0 22 32 　 22.9     0 1.3 21 6.5 66° 　 — 0.7 1020 1290 12 TK16 5 43 TK16-OP 4 35 16 +9 26 36 　 24.9 -0.2 1.3 24.9 9 68° 　 — 1.0 125 1550 16 TK20 6 58 TK20-OP 5 48 20 -1 32 45 ±0.2 31.5 　 1.6 30.3 9 55° 3 — 1.0 2090 2630 20 TK25 6 123 TK25-OP 5 103 25 +11 40 58 　 44.1 　 1.85 37.5 11.5 57° 　 1.5 1.5 3780 4720 25 TK30 6 216 TK30-OP 5 177 30 -1 47 68 　 52.1     0 -0.3 1.85 44.5 14 57° 　 2 2.2 5470 6810 30 TK40 6 333 TK40-OP 5 275 40 +13/-2 62 80 　 60.6 　 2.15 59 19.5 56° 　 1.5 1.5 6590 8230 40 *Based on nominal housing bore 1N=0.102kgf

Copyright  © 2007 Silverstone machinery industry Co.,Ltd. All Right Reserved.                                                       Design:enxun.com